IRWIN Tools

Improving drilling efficiency and maintaining stable bit life are constant challenges on job sites—especially when materials change from surface to surface.

This article introduces IRWIN Tools’ carbide drill bit lineup for professionals looking to drill faster, reduce bit breakage, and keep hole quality consistent.

Recommended
Applications
for IRWIN
Tools

IRWIN Tools offers carbide-tipped drill solutions designed for tough, abrasive applications where standard bits can slow down or wear quickly.

In particular, IRWIN’s carbide drill offerings are widely used for masonry and concrete drilling, where fast dust removal and durable carbide tips help reduce clogging and improve productivity.

For mixed-material tasks—such as drilling through tile, brick, wood, plastic, or light metal—IRWIN’s multi-material carbide bits are designed to start accurately and maintain hole quality across a range of surfaces.

Note: Performance may vary depending on cutting conditions such as speed, feed rate, drill mode, dust extraction, and tool/machine rigidity.

Key Products from
IRWIN
Tools

MASONRY DRILL BITS

Overview

IRWIN’s Masonry Drill Bits are built around a carbide tip design intended for durability and fast drilling in masonry materials. The head geometry is designed to improve drilling speed, and the tip-to-body bond is reinforced through a dedicated brazing process.

Key features include:

• Improved carbide tip design for durability and fast drilling in masonry materials
• Aggressive head design for up to 15% speed advantage
• Unique brazing process to help ensure a strong bond between the tip and body
• Single flute design intended to maximize dust removal

These design elements support stable drilling and reduced clogging when working in common masonry substrates.

Compatible Materials

• Brick
• Block
• General masonry materials
• Concrete

Lineup

• Available in multiple sizes; examples include a 12mm cordless masonry drill bit listed under the product page.

SPEEDHAMMER® PLUS DRILL BIT

Overview

SPEEDHAMMER® PLUS is designed for high-speed masonry drilling with geometry aimed at faster penetration and smoother dust evacuation. The manufacturer highlights a thicker carbide tip for strength and durability, plus a short head design intended to push drilling dust directly into the flute to reduce clogging.

Key features include:

• Innovative head and tip geometry with a 25% thicker carbide tip
• Aggressive concave cutting angles designed to increase drilling speed by up to 20%
• Extra short head designed to clear dust into the flute and reduce clogging
• Self-centering point intended to reduce walking
• Extra deep, asymmetrical flute design designed for faster dust removal

The product overview also notes 28% greater flute capacity and positions the design as particularly effective in uncured concrete due to clog-free performance.

Compatible Materials

• Concrete
• Brick
• Block
• Masonry materials where fast dust removal is beneficial

Lineup

• Example included on the product page: (1) IRWIN® SPEEDHAMMER® PLUS drill bit 10.0 x 160 mm

IRWIN® SpeedHammer Power™ SDS Plus Drill Bits

Overview

IRWIN® SpeedHammer Power™ SDS Plus shank masonry bits are positioned for SDS Plus (and TEC-style) drilling applications. The product category description highlights a flute design and a patented carbide tip intended to optimize high-speed cutting and extend bit life.

Compatible Materials

• Concrete
• Masonry materials used with SDS Plus / compatible rotary hammers

Lineup

• Multiple sizes are listed in the SDS Plus category; examples shown include 6mm x 110mm, 8mm x 110mm, 10mm x 160mm, and 10mm x 260mm drill bits.

IRWIN Multi-Material Carbide Masonry Drill Bits

Overview

IRWIN’s Multi-Material carbide masonry drill bits are designed for users who regularly switch between surfaces and still need clean hole quality. The retail description highlights a diamond-ground, 4-facet carbide tip designed for centered starts with little walking, plus flute and finish features intended to reduce clogging and improve durability.

Key features include:

• Diamond-ground, 4-facet carbide tip designed for centered starts and reduced walking
• Duotone finish intended to reduce friction and improve heat dissipation
• Double-milled flute intended to improve dust removal and reduce clogging

Compatible Materials

• Brick
• Block
• Tile
• Metal
• Wood
• Plastic
• Marble

Lineup

• Available in multiple sizes in retail channels (examples commonly listed include 1/4 in x 4 in and other diameters/lengths depending on store assortment).

For more detailed technical information and product comparisons, visit our special feature on carbide drills for stainless steel.
The page highlights three top manufacturers with proven strengths in stainless steel machining, including in-depth coverage of recommended tools for this demanding material.

After-Sales Support
from IRWIN
Tools

IRWIN Tools provides product and service support through its official support channels, including a retailer locator and customer contact options.

Support options include:

• Find a Retailer tool for locating online and nearby sellers
  https://www.irwintools.com/find-retailer
• Contact form for general inquiries
  https://www.irwintools.com/contact
• Warranty information page for warranty terms and coverage details
  https://www.irwintools.com/warranty-information
• Support request submission
  https://support.irwin.com/hc/en-us/requests/new

Company Information

Official Website	https://www.irwintools.com/
Parent Company	Stanley Black & Decker
Founded Year	1885