Titan USA

Titan USA is a U.S.-based cutting tool manufacturer offering a wide range of drills made from carbide, cobalt, and high-speed steel.

This article introduces Titan USA’s key carbide drill products, highlighting their features and available lineups.

Recommended
Applications for Titan USA

Titan USA’s drills are ideal for machining difficult-to-cut materials where tool life and overall cost are major concerns.

Materials commonly used in aerospace and automotive parts—such as stainless steel and titanium alloys—tend to generate high heat and wear during cutting, which can lead to premature tool failure and increased replacement costs.

Titan USA addresses these challenges through a variety of coatings (including AlTiN, Black Oxide, and Bright finishes) as well as diverse point angles, flute geometries, and drill lengths.

This broad selection enables process optimization for each cutting condition, helping reduce friction and heat buildup, promoting smooth chip evacuation, and minimizing wear and clogging.

The result is stable, high-precision machining performance—even with hard-to-machine materials.

Note: Performance may vary depending on tool type, cutting speed, feed rate, coolant type, and machine rigidity.

How to Choose Drills
from Titan USA

As a carbide drills manufacturer and cutting tool supplier with a broad drilling lineup, Titan USA offers carbide, cobalt, and high speed steel drill options for different machining needs. The best choice depends on the workpiece material, production volume, hole depth, machine rigidity, and the required balance between tool life, toughness, and cost efficiency.

For High-Speed Drilling in Hard Materials

Recommended Series

Drills – Carbide Series

When to Choose This Type

Choose the Carbide Series when high-speed, high-volume drilling is required in harder materials such as hardened steels and cast iron. This series is a practical option for applications such as automotive parts, mold manufacturing, and other production environments where edge retention and wear resistance are important.

Made from premium carbide, these drills combine high hardness with strong wear resistance, helping maintain cutting-edge performance during continuous operation and high spindle-speed machining.

The lineup includes multiple configurations for different holemaking needs, including short-length stub drills for shallow holes, three-flute 150° drills for reducing exit burrs on angled or curved surfaces, and spade drills with replaceable tips for flexible, cost-effective operation. AlTiN coating options are also available for improved heat resistance and longer tool life in mass production.

Suitable Materials

Not specified on the official website.

Available Types

• Drills – Carbide 3 Flute – 150° Point
• Drills – Carbide Jobber Length – 118° Split Point
• Drills – Carbide Straight Flute – 140° Split Point
• Drills – Carbide Stub Length – 135° Split Point
• Drills – Carbide Spade Drill

For more detailed technical information and product comparisons, visit our special feature on carbide drills for stainless steel.
The page highlights three top manufacturers with proven strengths in stainless steel machining, including in-depth coverage of recommended tools for this demanding material.

For Stainless Steel, Nickel Alloys, and Titanium Alloys

Recommended Series

Drills – Cobalt Series

When to Choose This Type

Choose the Cobalt Series when drilling hard-to-cut materials that generate significant cutting heat, such as stainless steel, nickel-based alloys, and titanium alloys. This series is suitable when heat resistance and toughness are more important than maximum carbide-level rigidity.

Made from M42 high-speed steel with approximately 8% cobalt, these drills retain hardness at elevated temperatures. This helps support stable accuracy and reliable performance under the demanding cutting conditions often found in difficult-material machining.

Suitable Materials

Not specified on the official website.

Available Types

• Drills – Cobalt Aircraft Extension Drills – 135° Split Point
• Drills – Cobalt Jobber Length – 135° Split Point
• Drills – Cobalt Jobber Length Parabolic Flute – 135° Split Point
• Drills – Cobalt Stub Length – 135° Split Point
• Drills – Cobalt Silver & Deming – 135° Split Point

For General-Purpose and Economical Holemaking

Recommended Series

Drills – High Speed Steel Series

When to Choose This Type

Choose the High Speed Steel Series when the application calls for economical, general-purpose drilling across a wide range of materials. This series is a practical option for shops that need versatility, tool reliability, and cost efficiency rather than the highest possible cutting speed.

The series includes specialized designs for different machining needs, such as long-length drills for deep holes, parabolic flute models for improved chip evacuation, and Silver & Deming drills for large-diameter holemaking.

These configurations help address common drilling challenges such as hole depth, chip removal, and hole enlargement while maintaining accuracy and tool reliability during extended operations.

Suitable Materials

Not specified on the official website.

Available Types

• Drills – High Speed Steel Aircraft Extension Drills – 135° Split Point
• Drills – High Speed Steel Extra Long – 118° Point
• Drills – High Speed Steel Jobber Length – 118° Point – Black Oxide Finish
• Drills – High Speed Steel Jobber Length – 118° Point – Bright Finish & TiN Coated
• Drills – High Speed Steel Jobber Length – 118° Point – Left Hand Spiral – Bright Finish
• Drills – High Speed Steel Jobber Length – 135° Split Point
• Drills – High Speed Steel Mechanics Length – 135° Split Point
• Drills – High Speed Steel Silver & Deming – 118° Point
• Drills – High Speed Steel Silver & Deming – 118° Point – 3 Flats
• Drills – High Speed Steel Silver & Deming – 118° Split Point – 3 Flats – Black & Gold Oxide Finish
• Drills – High Speed Steel Stub Length – 135° Split Point
• Drills – High Speed Steel Taper Shank – 118° Point
• Drills – High Speed Steel Taper Length – 118° Point

Quick Selection Guide

• For high-speed production drilling: Choose the Drills – Carbide Series.
• For hardened steels, cast iron, automotive parts, or mold manufacturing: Consider carbide drills for wear resistance and edge retention.
• For angled or curved surfaces: Consider the Carbide 3 Flute – 150° Point option to help reduce exit burrs.
• For stainless steel, nickel alloys, or titanium alloys: Choose the Drills – Cobalt Series.
• For heat-generating difficult materials: Consider cobalt drills made from M42 high-speed steel with approximately 8% cobalt.
• For economical general-purpose drilling: Choose the High Speed Steel Series.
• For deep holes or improved chip evacuation: Consider HSS extra-long or parabolic flute options.
• For large-diameter holemaking: Consider High Speed Steel Silver & Deming drills.

After-Sales Support from Titan USA

Not specified on the official website

Company Information

Address	428 Newburyport Turnpike Rowley, MA 01969-1729
Phone Number	844-393-8665
Official Website	https://www.harveyperformance.com/